HOW TO OPERATE
HOW TO OPERATE-POWER / WATER SUPPLY
1. Plug in the AC power plug firmly.
2. Turn on the main power. Switch on the right side.
▶
The unit will beep and the LCD screen will display the
initial modes
3. Slowly rotate the operation knob clockwise to
have the water inflow into the unit.
4. Notice the water inflow rate as shown in the screen and adjust if
necessary.
▶
The water inflow rate is indicated in a numerical value.
▶
The optimum inflow rate is 2.0 litres/min.
▶
Adjust the water inflow rate by using the operation knob.
▶
The screen backlight color will be varied according to the
chosen function and pH level.
HOW TO STOP THE OPERATION
1. Rotate the operation knob counterclockwise to the
(OFF) position.
2. The unit will return to standby
mode status.
※
Occasionally there is a
“tick”sounding noise from inside the unit after stopping the operation.
AMS 4 0 0 0
AMS 4000S
13
Summary of Contents for AMS4000
Page 27: ...MEMO 27 AMS 4 0 0 0 AMS 4000S...
