SAFETY INSTRUCTIONS
DIGITAL
WATER
IONIZER
A
When the unit is imersed into water, pull out the power plug
KB|fl
immediately and then take the unit out of the water.
Avoid an electric circuit overload of an outlet or electric wiring.
Connect
the
unit
power
plug
to
the
correspondent
AC
voltage
outlet.
>
Ensuring the unit is connected directly and solely to a power supply
will avoid overloading the appliance and reduce risk factor.
k
Do not touch the power plug with the wet hands when you put it in
KlEl/|ll
or out of a wall outlet.
^
^
> If the plug.-in fitting is not stable, it may cause an electric shock or
If the supplied
cord is damaged,
it must be replaced
by the
manufacturer, it's service agent or qualified persons. Please refer
this condition to your seller and enforce manufacturer's
warranty
as per the Warranty Card instructions.
I
Do not install the unit in a place of below-freezing temperature
or near any fire source.
>
Correct environment temperature range: 10
~ 35oC (50~95oF)
Correct inflow water temperature: 5 ~ 30oC (41~86oF)
^
O>oEntxtrotei!talell~~nZ~tn~aln
~~ts!reun'~a9hyt~cause
the exterior unit body
to discolor and may cause the entire unit to warp/twist the casing.
This may result in mechanical failure,
>
Extreme environmental exposure may cause the exterior unit body
Always Install the unit on a horizontally flat surface.
