INSTALLATION
k_see '
D I G ETA L WATE R IO N IZE R
Faucet Type : External Screwed
Faucet Type : Internal Screwed
Faucet
Aerator
ON/OFF
Swivel
Water Faucet Diverter
Faucet
Aerator
Adaptor (optional)
ON/OFF
Swivel
Water Faucet
Dlverter
Source
Water
Source
Water Inlet Hose
N
Remove aerator from faucet,
Illa Pliers may be required.
X If required, attach adaptor (2 sizes of adaptor are supplied for use) before attaching water faucet diverter to faucet.
XRemove compression nut on the side of the water faucet diverter, attach Source Water Inlet Hose and tighten nut.
GD
The following types of water tap is NOT compatible for standard faucet installation
If you are using any of the followings, please ensure the water tap is replaced before faucet installation can be proceeded.
:C
'
O
I
Shower nozzle
Square
spout
Oval spout
Spout external
diameter more
than 24 mm
Spout less than
15 mm in height
Pull-down
sprayer
Tap with sensors
B
Cut the Water Drain Hose to length and direct it to the sink for
draining or collection of water output.
tile You can use the Hose-fixation holder to keep the Drain Water Hose
in place.
>
Maintain the lenght of drain water hose within 2 metres so as to allow natural drainage flow rate. Water outflow may
be suspended if the water outlet hose is steeped in water inside a container or if the hose is unnecessarily long.
> Do not lift the drain water hose above the bottom of the unit. This will hinder the water drainage and may
cause internal damage to the unit,
