( 4_2
\\li
.EA
!B K e Kill
K
INSTALLATION
DIGITAL
WATER
IONIZER
B Select a solid flat surface with proximity to a power
supply for desired location.
2@
Connect the provided 1/4 "
hose to water inlet port firmly.
- In case of one touch fitting type, have water inlet port nozzle put into the hose hole completely
(fasten the safety key thereon after the connection),
- In case of two touch fitting type, screw the nut tightly to ensure a water tight fitting.
, Water Inlet Port
Check Va ve
(Caution Flow Direction)
~
<=I|
Drain Wafer Outlet port
,
2Irn1......
. . . . . .
. . . . . .
,@
-d . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
||
The safety key
|]
(insert it in the arrow direction)
A
One touch fining
(View of safety key insertion)
@ Connect the hose to drain water outlet port and cut the other
end of the hose to have sufficient length to reach the sink for
draining away drain water or for connecting to drain water
bucket.
(Option: Drain water hose holder can be used for convenience).
> In case the drain water outlet hose is steeped in a receptacle or the hose is unnecessarily long, an outflow
rate of ionized water might be suspended. For this reason, maintain a shorter hose length to allow natural
flow rate for drainage.
b Do not lift the drain water outlet hose up to the bottom of the installed unit,
Otherwise this will hinder the water drain from the unit and may cause internal damage to the unit.
