ZYNQ FPGA Development Board AC7Z035 User Manual
16 / 33
Amazon Store: https://www.amazon.com/alinx
Signal Name
ZYNQ Pin Name
ZYNQ Pin Number
QSPI0_SCK
PS_MIO6_500
F23
QSPI0_CS
PS_MIO1_500
D26
QSPI0_D0
PS_MIO2_500
E25
QSPI0_D1
PS_MIO3_500
D25
QSPI0_D2
PS_MIO4_500
F24
QSPI0_D3
PS_MIO5_500
C26
QSPI1_SCK
PS_MIO9_500
D24
QSPI1_CS
PS_MIO0_500
E26
QSPI1_D0
PS_MIO10_500
A25
QSPI1_D1
PS_MIO11_500
B26
QSPI1_D2
PS_MIO12_500
A23
QSPI1_D3
PS_MIO13_500
B25
Part 5: eMMC Flash
The FPGA core board AC7Z035 is equipped with a large-capacity 8GB
eMMC FLASH chip, model THGBMFG6C1LBAIL, which supports the JEDEC
e-MMC V5.0 standard HS-MMC interface with level support of 1.8V or 3.3V.
The data width of the eMMC FLASH and ZYNQ connections is 4 bits. Due to
the large capacity and non-volatile nature of eMMC FLASH, it can be used as a
large-capacity storage device for the ZYNQ system, such as ARM applications,
system files and other user data files. The specific models and related
parameters of eMMC FLASH are shown in Table 5-1.
Position
Model
Capacity
Factory
U11
THGBMFG6C1LBAIL
8G Byte
TOSHIBA
Table 5-1: eMMC FLASH Specification
eMMC FLASH is connected to the GPIO port of the BANK501 in the PS
section of the ZYNQ chip. In the system design, the GPIO port functions of
these PS ports need to be configured as the SD interface. Figure 5-1 shows the
eMMC Flash in the schematic.