KINTEX-7 FPGA Development Board AV7K300 User Manual
43 / 45
Amazon Store: https://www.amazon.com/alinx
KEY1
B12_L19_N
AF21
User KEY1
KEY2
B12_11_N
AF23
User KEY2
KEY3
B12_L3_P
AB22
User KEY3
KEY4
B12_L5_P
AC20
User KEY4
Part 3.10: JTAG debug port
A JTAG interface is reserved JTAG interface one the AV7K300 FPGA
development board for downloading FPGA programs or firmware to FLASH. In
order to prevent damage to the FPGA chip caused by hot plugging, a protection
diode is added to the JTAG signal to ensure that the voltage of the signal is
within the range accepted by the FPGA to avoid damage of the FPGA chip.
Figure 3-10-1: JTAG Interface Schematic
Part 3.11: Power Supply
The power input voltage of the AV7K300 FPGA development board is
DC12V, and the FPGA development board can be powered by the PCIE slot or
an ex12V power supply. On the carrier board, the voltage is converted