29
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
ON:
Checks every 5 seconds whether the priority channel receives a
signal or not.
▼
OFF:
Does not check whether the priority channel receives a signal or
not.
If there is no priority channel, ON cannot be selected.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
MEMORY CHANNEL SCANNING SETTING
Set whether to skip programmed channels or scan only programmed
channels when scanning memory channels.
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "30".
The current setting will appear on the display.
The default setting is [SCHSKIP].
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
SKIP: Scans skipping programmed memory channels.
▼
ONLY: Scans only programmed memory channels.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
GROUP SCANNING STEP
Set the channel step for group scanning.
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "31".
The current setting will appear on the display.
The default setting is [GSTP.20].
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
10, 20, 30, 40, 50
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
7
PARAMETER SETTING MODE