23
7
PARAMETER SETTING MODE
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
OFF: Does not set the auto power off function.
▼
10 (min) to 60 (min) (6 steps in 10 minute increments):
Automatically turns off the power after the set time has elapsed.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
MESSAGE DISPLAYED WHEN TRUNING ON THE POWER
Set whether or not to display the message when turning on the power.
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "10".
The current setting will appear on the display.
The default setting is [MDL].
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
OFF: Switches to receiving mode immediately.
▼
MDL:
Displays the device name for 2 seconds, then switches to
receiving mode.
▼
MSG:
Displays the message set in the "SETTING THE MESSAGE
DISPLAYED WHEN TRUNING ON THE POWER" chapter, then
switches to receiving mode.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
SETTING THE MESSAGE DISPLAYED WHEN TRUNING ON THE POWER
Set the message displayed when turning on the power.
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "11".
2.
Refer to the operation method of the "Memory NAME" to set the
message to display.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
BCLO SETTING
Transmission can be limited depending on the receiving state. When
BCLO is set to ON, transmission can be initiated in the following
situation.
• When any signals are not input (when [BUSY] is off)
• If the tone frequency matches and the squelch opens when the tone
squelch is set
• If the code matches and the squelch opens when the DCS is set
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "12".
The current setting will appear on the display.
The default setting is [BCLO.OFF].
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.