Alinco DR-638, Instruction Manual

Page: 37 / 47

26
6 Parameter Setting Mode (SET MODE)
The transceiver offers enquiry of calling record.
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select
the menu 48 NOTE and press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the value:
This transceiver is able to record 16
calling at most.
Press [
31 PTT]
to set and exit or press the dial to set and continue.
MENU 48: CALLING RECORD
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select
the menu 49 AM and press the dial.
Rotate the dial or use
21
[UP/DOWN] keys
MENU 49: AM FUNCTION
This function is only valid when the Main band frequency is VHF 108-
180MHz, the function is invalid when the right band is set as Main band.
NOTE
MENU 50: AUTOMATIC AM FUNCTION
To enable Automatic AM function, the AM function shall be turned on first.
The radio will automatically boot AM function when the VHF frequency is
under 136MHz.
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select the menu 50 AUT AM and
press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the value:
31
ON: turn on auto AM function.
OFF: turn off auto AM function.
Press [
41 PTT]
to set and exit or press the dial to set and continue.
NOTE
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select
the menu 47 DIMMER and press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the value:
Available value: 32 brightness levels.
Press
31
[
PTT]
to set and exit or press the dial to set and continue.
MENU 47: kEYPAD BACkLIGHT BRIGHTNESS
to select wanted value. Each color (Red,
Green, Bule) with 32 brightness levels.
Press [
31 PTT]
to set and exit or press the
dial to set and continue.
to select the value:
ON: turn on AM function.
OFF: turn off AM function.
Press [
31 PTT]
to set and exit or press the dial to set and continue.
MENU 51: VHF ExTERNAL SPEAkER PORT
When the function setup as external (EXT), an external Dual Track
speaker must be connected in order to hear the calling on VHF. The
calling from VHF and UHF are separated in 2 tracks.
Press and hold
11
key until activating
the function menu. Rotate the dial or use
[UP/DOWN] keys to select the menu 51