23
The squelch opens only when the signal strength reaches to the selected
S-meter reading.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 32 RF SQL and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
S-3:
Squelch opens at 3 bar.
S-5:
Squelch opens at 5 bars.
S-9:
Squelch opens at 9 bars.
S-FULL:
Squelch opens at FULL-scale
reading only.
Press [
31
PTT]
to set and exit or press the dial to set and continue.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 33 RPT MOD
and press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
- :
M i n u s o ff s e t , m e a n s t r a n s m i t t i n g
frequency is lower than receiving
frequency.
+ :
P l u s o ff s e t , m e a n s t r a n s m i t t i n g
frequency is higher than receiving
frequency.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 34 SCAN and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
TIME:
Pauses 5 seconds to receive the
signal and resume scanning.
BUSY:
Remains on the frequency until
the signal is gone, then resume scanning
after pausing 2 seconds.
SECEDE:
Cancels scanning when a
signal is received and stopped scanning.
Press [
31
PTT]
to set and exit or press the
dial to set and continue.
MENU 32: RF SQUELCH
MENU 33: OFFSET DIRECTION
MENU 34: SCAN RESUME CONDITION
6
Parameter Setting Mode (SET MODE)
when open, SQL ring adjustment is inefficiency.
NOTE
OFF:
OFFSET is turn off. Transmitting frequency is the same as
receiving frequency.
Press [
31
PTT]
to set and exit or press the dial to set and continue.
Priority channels must be pre-programmed in P SCAN to set this
parameter.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 35 SCAN M and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
MEN:
Scans all memory channels in the
channel scanning mode.
MENU 35: PRIORITY CHANNEL SCAN
