25
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 41 VFOTR and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
ON:
Turn on the Link. In VFO mode, both
MAIN and SUB band frequencies
changes by the same channel steps at
dial or
[UP/DOWN]
operation.
OFF:
Turn off the Link.
Press [
31
PTT]
to set and exit or press the dial to set and continue.
MENU 41: VFO FREQUENCY LINkAGE
This function is valid only when both bands operate in VFO mode.
NOTE
6
Parameter Setting Mode (SET MODE)
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 42 WINNAR and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the mode:
WIDE:
Wide bandwidth (25KHz)
P
11
ress and hold
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 43 X-RPT.
Press the dial to display "
21
xSTART"
.
Press the dial again, a beep sounds and
31
displays REP.
Rotate the dial or use
41
[UP/DOWN]
keys to
select the value.
Press [
51
PTT]
to set and exit or press the
dial to set and continue.
MENU 42: WIDE/NARROW FM MODE
MENU 43: CROSSBAND REPEAT
The FM bandwidth must be set correctly in accordance with your local
regulations. Incorrect setting may also cause poor audio quality.
NOTE
Press and hold
11
key until activating
the function menu. Rotate the dial or use
[UP/DOWN]
keys to select themenu No.
44-46 menu The LCD displays "
COL
RED
", "
COLGRN
", "
COL BLU
" and press
the dial.
Rotate the dial or use
21
[UP/DOWN]
keys
MENU 44-46: LCD BACkLIGHT
The 5-TONE self ID is shown on the
21
display.
Press [
31
PTT]
to set and exit or press the
dial to set and continue.
MIDDLE:
Middle bandwidth (20KHz)
NARROW:
Narrow bandwidth (12.5KHz)
Press [
31
PTT]
to set and exit or press the
dial to set and continue.
