33
6.RTCDT
Set up the CTCSS/DCS code for both TX and RX CTCSS code: 62.5Hz~254.1Hz, a
total of 51 groups DCS code: 000N~7771, a total of 1024 groups.
7.Optional Signal
Allows the set up of DTMF/5TONE/2TONE encode and decode for the analog channels.
8.TX power
Refer to digital channel setting
9. Offset
Allow to set the offset frequency for transmit frequency
10.Squelch mode
When the analog channel is set up for both CTCSS/DCS decoding and optional
signaling, you can set up the RX condition in this menu.
SQ: You can hear the call when the channel receives a matched carrier.
CDT: You can hear the call when the channel receives a matched CTCSS/ DCS signal
TONE: You can hear the call when the channel receives a matched signaling.
C&T: You can hear the call when the channel receives a matched CTCSS/ DCS and
matched tone signaling.
C|T: You can hear the call when the channel receives a matched CTCSS/ DCS or
matched signaling
11.Band Width
Choose wide band or narrow band for the analog channel.
12.Reverse
When this function is enabled, the RX frequency, TX frequency and CTCSS/DCS
encode/decode will be reversed.
13. RX Frequency
Refer to digital channel setting
14.TX Frequency
Refer to digital channel setting
Summary of Contents for DJ-MD5X
Page 36: ...36 ...
