29
Middle: 2.5W
High: 5W
5. Offset
Press the
/
key to adjust frequency offset.
6. Band Width
Only narrow band 12.5KHz for digital channel.
7. RX Freq
Input the desired RX frequency by keypad, Press
(MENU) key to save the change.
Be noted that if auto repeater is set with a offset frequency, when changing RX
frequency the TX frequency will be changed by offset. If auto repeater with offset
frequency is set Off. RX and TX frequency are set independence.
8. TX Freq
Input the desired TX frequency by keypad, Press
(MENU) key to save the change.
9. Talk Around
As normal a radio communicates to a target radio through a repeater (TX and RX
frequency are set as different values). This option allows 2 radios communicate to
each others but you don’t want to change frequency settings when repeater is out of
range or when the repeater is down. It works in both digital and analog channel. When
talk around set the transmitting radio`s TX and RX frequency are interchanged. Turn
off Talk Around when you want to communicate through repeater as normal.
Note: In analog channel the RX CTCSS/DCS decode is TX CTCSS/DCS encode and
vice versa.
10. Name
Allow edit the channel name via input character by keypad. This function is only valid
in memory channel mode.
11. TX Allow
Always:
Always allow to transmit.
Channel Free:
Allow to transmit when the channel is free.
Different CC:
Allow to transmit when radio receives a matching carrier signal but
different color code.
Same CC:
Allow to transmit when radio receives a matching carrier signal and it has
same color code.
Summary of Contents for DJ-MD5X
Page 36: ...36 ...
