42
AUXILIARY FUNCTIONS
4. Press
key to exit.
5. Press
key to perform the reset.
Cable Cloning
With this function, you can copy the programming data of the transceiver to another one; it can copy
parameters and memory programming data to another transceiver.
Connection:
Use wire cloning cable to connect main transceiver with sub- transceiver through reading /
writing programmable interface.
Setup:
main transceiver party
1.Hold
[PF1]
side key to power on, LCD displays "
CLONE"
, main transceiver enters
into copy mode.
2.Press
[PF1]
key, LCD displays
"CLONE XX"
,
XX
means the transmitted data quantity.
3.After data copies completely, LCD displays
"CLONE OK"
.
4.Main transceiver stays in this mode preparing to next copy, restart main transceiver to exit copy mode.
Setup: sub-transceiver party.
1.When receiving data, LCD displays "
CLONE XX
", XX means the received data quantity.
2.After data received sub-transceiver returns to normal mode.
3.Power off, take over cable line and link to another sub-transceiver which you want to copy.
If data can not transfer successfully, power off main transceiver and sub-transceiver, check the cable line
and repeat the process.
