Alimak Scando 650 DOL, Technical Description

Page: 7 / 148

Technical description
General
The new SCANDO 650 hoists are construction hoists for
personnel and materials transport. Two car base structures
can be combined with different gate units and extensions to a
number of different car lengths up to maximum 4.6 m (15’- 1’’).
Car width 1.5 m (4’- 11’’) is fixed.
The car, as well as the ground enclosures doors/gates, can be
positioned on any of the three sides away from mast.
The hoists have a lifting capacity of maximum 3200 kg
(7100 lbs.) up to a lifting height of 200 m (650 ft.).
Lifting speed is 38 m/min. (125 fpm.).
alt. 42, 54 or maximum 65 m/min. (135 , 175 or 215 fpm.)
with VFC-operation.
The SCANDO 650 construction hoist can be set up with
single or dual cars.
The hoist is easily transported by truck, to and from the
erection site and handled with forklift trucks or jib cranes on
the site.
The SCANDO 650 construction hoist is a part of the
SCANDO 650 access system and can be combined with
other products, i.e. platforms or materials hoists.
Regulations
The hoist and its mechanical and electrical components are
designed and dimensioned to conform to operating condi-
tions on contruction sites and fulfil demands according to EN
12159 and ANSI/ASME. The hoists and its components have
been thoroughly tested and conform to one or several of the
following international/national standards: IEC, CEE, EN,
DIN, UL, CSA, SS etc.
Necessary documents such as operator’s manual, wiring
diagrams, circuit diagrams and spare parts lists are delivered
with the hoist.
ALIMAK 34739 - 1/02
A
1