manualshive.com logo in svg

Alimak Scando 650 DOL, Technical Description

Share
Download
Alimak Scando 650 DOL Technical Description Download Page 31

Load signs

Load sign showing maximum load and maximum number of
passengers in the car, must be displayed inside the car and on
each landing, according to EN 12159.
The sign must be durable and with minimum 25 mm (1 in.)
height of the characters.

It is advisable to use hot seal laminating film for this purpose.

Data on load signs must be in accordance with technical data
and additional technical information on pages B1 – B4 in this
manual. 

Print your own load sign.

Click here; Acrobat PDF

Note: It is possible to copy text and paste into your own word
processing program on your computer. 

Sign inside the car showing specifications for the particular
installation

It is possible to write /erase the sign inside the car showing
specifications for the particular installation. The sign must be
filled in and signed by a person responsible for the entire hoist
installation.

The intention with showing this sign is to ensure personnel
using the hoist and inspectors from the responsible authorities
that the hoist is correctly installed according to the person
responsible for the entire hoist installation.

ALIMAK  34763  -  1/01

A

25

Summary of Contents for Scando 650 DOL





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands