37
After installing the control linkages, it will be necessary for you to set and adjust the following in your
transmitter before proceeding with testing the controls for proper response and operation.
The following are required settings for all JR and Spektrum transmitters. These settings will also be similar
for other brands of transmitters.
Sub-Trim
Throttle
0%
Aileron
Minimum required so servo arm is horizontal (or 5–10° upward if using an S75 servo) at
half stick/0° pitch
Elevator
Minimum required so servo arm is horizontal (or 5–10° upward if using an S75 servo) at
half stick/0° pitch
Rudder
Minimum required to trim tail servo neutral in Heading/Tail Lock Mode
(See gyro manual for more info)
Gear
0%
Pitch
Minimum required so servo arm is horizontal (or 5–10° upward if using an S75 servo) at
half stick/0° pitch
Travel Adjustment Values
Throttle
-100% / +100%
Aileron
-100% / +100%
Elevator
-100% / +100%
Rudder
-80% / +80% (Adjusted to control tail servo response and speed of pirouette after flight
testing. See gyro manual for more info.)
Gear
-75% / +75% (Adjusted to control gyro gain value after flight testing.
See gyro manual for more info.)
Pitch
-100% / +100%
Throttle Hold
Set to 0%
Revolution Mixing
Inhibit (Set to 0%)
11.0 Additional Transmitter Setup
and Adjustment
Summary of Contents for T-REX 450SA ARF
Page 70: ...70 Building Notes ...
Page 71: ...71 Flying Notes ...
