Alienware Aurora R13 Service Manual Download Page 89 | Manualshive

Page: 89 / 105

background image

NOTE: Not all files can be installed automatically. Review the installation summary to identify if manual installation is
necessary.

13. For manual download and installation, click Category.
14. Click Chipset in the drop-down list.
15. Click Download to download the media-card reader driver for your computer.
16. After the download is complete, navigate to the folder where you saved the media-card reader driver file.
17. Double-click the media-card reader driver file icon and follow the instructions on the screen to install the driver.

Downloading the chipset driver

Steps
1. Turn on your computer.
2. Go to

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click Submit.

NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click Drivers & downloads.
5. Click the Detect Drivers button.
6. Review and agree to the Terms and Conditions to use SupportAssist, then click Continue.
7. If necessary, your computer starts to download and install SupportAssist.

NOTE: Review on-screen instructions for browser-specific instructions.

8. Click View Drivers for My System.
9. Click Download and Install to download and install all driver updates detected for your computer.
10. Select a location to save the files.
11. If prompted, approve requests from User Account Control to make changes on the computer.
12. The application installs all drivers and updates identified.

NOTE: Not all files can be installed automatically. Review the installation summary to identify if manual installation is
necessary.

13. For manual download and installation, click Category.
14. Click Chipset in the drop-down list.
15. Click Download to download the chipset driver for your computer.
16. After the download is complete, browse the folder where you saved the chipset driver file.
17. Double-click the chipset driver file icon and follow the instructions on the screen to install the driver.

Downloading the network driver

Steps
1. Turn on your computer.
2. Go to

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click Submit.

NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click Drivers & downloads.
5. Click the Detect Drivers button.
6. Review and agree to the Terms and Conditions to use SupportAssist, then click Continue.
7. If necessary, your computer starts to download and install SupportAssist.

89

«
...
87
88
89
90
91
...
»

Summary of Contents for Aurora R13










































































































Reviews:

No comments

Related manuals for Aurora R13

Brand: Tandy Pages: 493

PowerBox 310 Series

Brand: Spectra Pages: 116

Brand: Advantech Pages: 94

eBOX625-842-FL Series

Brand: AXIOMTEK Pages: 60

Brand: Moxa Technologies Pages: 2

InBox300 Series

Brand: InHand Pages: 28

Brand: HP Pages: 33

280 G5 SFF Business PC

Brand: HP Pages: 19

2133 Mini-Note PC

Brand: HP Pages: 4

Brand: HP Pages: 16

205 G2 AiO Business

Brand: HP Pages: 13

Brand: HP Pages: 60

Brand: HP Pages: 13

Brand: HP Pages: 6

Brand: HP Pages: 7

280 G3 Microtower Business

Brand: HP Pages: 10

Brand: HP Pages: 7

Brand: HP Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands