Alien Pod DSD106 Operation Manual Download Page 5 | Manualshive

Page: 5 / 72

background image

5

1 Features

This DVR range uses the embedded MCU and realtime operating system
combining the most advanced technology in the information industry. It incorporates
video and audio encoding and decoding, hard disk record and TCP/IP. The firmware
is installed in the flash drive and is very stable and reliable.
The DVR has both the features of a digital video recorder and a digital video
server. It works as a standalone unit or can be incorporated into a powerful surveillance
network, suitable for use in shops, transportation, warehouses, clubs and public houses etc.,
and particularly where space is limited.

Compression

Supports CIF mode at 25FPS, 2CIF at 12FPS and 4CIF at 6FPS, multi area motion
detection, OSD and changeable OSD position, LOGO and changeable LOGO position.

Local functions
Record

Supports multiple record type, including realtime, manual record, motion detection,
external alarm, motion&alarm, motion/alarm. Allows selection of CIF mode at 25FPS,
2CIF at 12FPS and 4CIF at 6FPS.
Supports 1 SATA Hard Drive, FAT32 file system, HDD SMART technology, cycle
or non cycle record, backup of recorded files and clips.
Supports USB memory, USB HDD, USB CD-R/W and USB DVD-R/W.

Preview and Playback

Supports internal composite monitor or VGA output and composite spot monitor. Internal
or VGA monitor provides multiple preview modes, sensitive area mask, camera alarm
block, single channel playback by file or time and displays local record status. Spot
provides single channel preview mode only.

PTZ

Supports numerous PTZ protocols, presets, sequence and cruise.

Alarms

Supports exception alarm, motion detection alarm, external alarm etc.

Others

Supports IR control and multi-level user management.

Network

Supports TCP, UDP, RTP, Multicast for network preview and PPPoE for broadband.
Supports remote parameter setup, can send alarm information to remote centre,
network control PTZ, network record live stream, network download and play back
recorded files in DVR and remotely upgrade firmware.

«
...
3
4
5
6
7
...
»

Summary of Contents for DSD106









































































Reviews:

No comments

Related manuals for DSD106

Brand: Blaupunkt Pages: 12

Brand: Novus Pages: 120

Brand: dallmeier Pages: 147

Brand: Sound Devices Pages: 84

Brand: Goodmans Pages: 34

Brand: Ness Pages: 72

Brand: Elec Pages: 55

Brand: XtendLan Pages: 107

Brand: Encore Pages: 35

Brand: ICRealtime Pages: 37

Brand: Swann Pages: 12

Brand: Vivotek Pages: 198

Brand: Digital Watchdog Pages: 85

Brand: Eagle Pages: 92

OBSERVER 4401-HVR

Brand: Safety Vision Pages: 14

DIGIMASTER SERIES

Brand: Ganz Pages: 64

Brand: Meicheng Pages: 21

Brand: Qvidium Pages: 71

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands