Alien Pod DSD106, Operation Manual

Page: 46 / 72

46
IP
Set the IP address in the DVR. The IP set by the manufacturer must be
changed. Refer to the later section on setting up a network. If there is a DHCP
server in the network you can set the IP as 0.0.0.0 then Confirm and the unit
will automatically reboot using DHCP to dynamically assign an IP address,
Mask and Gateway. If you then go into the Network menu, you can see the IP
address allocated and then use this address for accessing by the local client
software. If the unit still shows the IP address for the DVR as 0.0.0.0 then the
DHCP server has not been found and the IP address, Mask and Gateway will
have to be set manually.
Port
The port address for the Client software.
Mask
The subnet mask used. This must be common in all equipment used on this
network. This defines the size of the network and is generally 255.255.255.0
Gateway
The modem/router local address.
HTTP Port
This is set as 80 for access via Internet Explorer. This is for web access and
uses ActiveX to load the software. If ActiveX security does not allow the load,
then the security will have to be reduced.
Advanced Settings
If you click on Advanced Settings Setup the following screen will be
displayed:
Mac:
This is the DVR Mac address.