Alien Pod DSD106, Operation Manual

Page: 30 / 72

30
5.4 Video Output Standard and VGA Setup
Video Output Standard
This DVR will support PAL or NTSC video output. Set the video output to
match the video input standard by selecting the Video Standard box with the
up and down arrow keys and selecting PAL or NTSC. PAL is the standard
used in the U.K.
VGA setup
There is one VGA interface on the rear of the DVR. Set the VGA resolution of
the monitor in the Display menu. Select from the following options:
1024 x 768 60Hz, 800 x 600 60Hz, 800 x 600 75Hz..
Use the up and down arrow buttons to select option and then press Confirm
button to save or press the Cancel button to abort.
5.5 OSD Setup
OSD (On Screen Display) allows the system time and camera name to be
displayed. OSD settings include: system time, time format, time display
position, camera name, camera name display position etc.
System Time
In the Display menu you can setup the DVR system date and time.
Display System Time
You can also display the properties of each camera including display status,
position and format. You can copy the properties from one camera to another.
In the Image Setup menu select one camera:
Date OSD
There are four display modes: Opaque&Steady, Transparent&Steady,
Transparent&Flashing and Opaque&Flashing. Move to Date OSD and select
one mode.