Alien Pod DSD106 Operation Manual Download Page 28 | Manualshive

Page: 28 / 72

background image

28

rights appertaining to this username. These include local playback,
remote playback and log access etc. If you wish to reduce these rights
select the Set Privileges button. Use the left and right arrow keys to
move to the appropriate rights, then press Enter or Edit key to enable or
disable the facility. A tick confirms the right is enabled. On completion
of changes press the Enter button to save the new user rights and return
to the User Management menu. If you press the Cancel button the user
rights will be aborted.

5.

Saving the new username password and rights

In the User Management menu press the Confirm button and the user
password and rights will be saved and you will be returned to the Main
menu. If you press Cancel the user password and rights will be aborted.

User Rights Description
Local Rights

Local rights are for local operators such as using the DVR front panel, IR
remote and RS485 keyboard.
PTZ Control:

Local control of PTZ

Record:

Manual stop/start recording

Playback:

Local playback and backup of recorded files

Parameter Setup:

Local setup of DVR parameters

Log:

Locally view the DVR log

Utilities:

Locally upgrade firmware, format HDD, reboot DVR
and shutdown DVR etc.

Remote Rights

PTZ Control:

Remote control of PTZ

Record:

Remote manual start/stop recording

Playback:

Remote playback, download the recorded DVR files

Parameters Setup: Remotely setup DVR parameters
Log:

Remotely view the DVR log

Utilities:

Remotely upgrade firmware, format HDD, reboot DVR
and shutdown DVR

Voice:

Client talks through DVR

Preview:

Network live preview

Alarm:

Remote control DVR alarm output

Local Video Out:

Remotely control DVR video output

MAC address

The MAC address is not the address of the DVR but the PC that accesses the
DVR. If you setup this MAC address only the PC with this MAC address can
access this DVR.

Local Play

Administrator can set local playback rights option for each channel.

Remote Play

Administrator can set remote playback rights option for each channel.

«
...
26
27
28
29
30
...
»

Summary of Contents for DSD106









































































Reviews:

No comments

Related manuals for DSD106

Brand: DynaColor Pages: 68

Brand: Foscam Pages: 67

Brand: Car Solutions Pages: 13

Brand: Vacron Pages: 69

Brand: AGI Security Pages: 46

Brand: Velleman Pages: 39

Brand: PCI Pages: 4

Brand: Velleman Pages: 107

Brand: Wisenet Pages: 8

Brand: Wisenet Pages: 13

Brand: Wisenet Pages: 14

Brand: Edirol Pages: 8

Brand: OwlTech Pages: 9

Brand: ENERGY SISTEM Pages: 32

Brand: RapidOS Pages: 80

Brand: Speed Concepts Pages: 12

Brand: Freesat Pages: 2

Brand: IntelLink Pages: 327

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands