10
1.5 Using the Front Panel Controls
ALIEN324/328/330 EKO Front Panel
1. READY
: the indicator lights in green when the device is running normally.
2
.
STATUS
: the indicator lights when the compound key switches to numeric/letter
input mode.
3. ALARM
: the indicator lights in red when there is sensor alarm occurring.
4. RECORD
: the indicator lights in green when the unit is under recording.
5. NETWORK
: the indictor flickers in green when network connection is
functioning normally.
6. Control Buttons:
•
Directional buttons:
In menu mode, the direction buttons are used to
navigate between different fields and items and select setting
parameters. In playback mode, the Up and Down buttons are used to
speed up and slow down record play, and the Left and Right buttons
are used to select the recording 30s forwards or backwards. In
preview mode, these buttons can be used to cycle through channels.
•
Enter:
The Enter button is used to confirm selection in menu mode;
or used to select checkbox fields and ON/OFF switch. In playback
mode, it can be used to play or pause the video. In single-frame play
mode, pressing the Enter button will advance the video by a single
frame. And in auto sequence preview mode, the buttons can be used
to pause / resume auto sequence.
7. IR Receiver:
Operation by IR remote control.
8. MENU:
(1) Enter numeral “1”; (2) Access the main menu interface.
9. 2ABC/F1
: (1) Enter numeral “2”; (2) Enter letters “ABC”; (3) The F1 button
when used in a list field will select all items on the list. In PTZ Control mode, it
will turn on/off PTZ light.
10. 3DEF/F2
: (1) Enter numeral “3”; (2) Enter letters “DEF”; (3) The F2 button is
used to cycle through tab pages. It will also bring up the Channel & OSD
position settings.
