C613-50163-01 Rev C
Command Reference for GS970M Series
875
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
IP
V
4 H
ARDWARE
A
CCESS
C
ONTROL
L
IST
(ACL) C
OMMANDS
(
NAMED
HARDWARE
ACL: ICMP
ENTRY
)
Examples
To add an access-list filter entry with a sequence number of 100 to the access-list
named “my-list” that will permit ICMP packets with a source address of
192.168.1.0/24, any destination address and an ICMP type of 5, use the commands:
awplus#
configure terminal
awplus(config)#
access-list hardware my-list
awplus(config-ip-hw-acl)#
100 permit icmp 192.168.1.0/24 any
icmp-type 5
To remove an access-list filter entry with a sequence number of 100 from the
access-list named “my-list”, use the commands:
awplus#
configure terminal
awplus(config)#
access-list hardware my-list
awplus(config-ip-hw-acl)#
no 100
Related
Commands
access-list hardware (named hardware ACL)
show access-list (IPv4 Hardware ACLs)
Command
changes
Version 5.4.6-2.1:
send-to-vlan-port
action parameter added
