C613-50163-01 Rev C
Command Reference for GS970M Series
1077
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
A
UTHENTICATION
C
OMMANDS
AUTH
SUPPLICANT
-
MAC
Default
No supplicant MAC address for port authentication exists by default until first
created with the
auth supplicant-mac
command. The defaults for parameters are
shown in the table above.
Mode
Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
Examples
To add the supplicant MAC address 0000.5E00.5343 to force authorized port
control for port1.0.2, use the commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.2
awplus(config-if)#
auth supplicant-mac 0000.5E00.5343
port-control force-authorized
To apply the mask ffff.ff00.0000 in order to add any supplicant whose MAC address
begins with 000.5E, and then to force authorized port control for port 1.0.2, use the
commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.2
awplus(config-if)#
auth supplicant-mac 0000.5E00.0000 mask
ffff.ff00.0000 port-control force-authorized
To delete the supplicant MAC address 0000.5E00.5343 for port1.0.2, use the
commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.2
awplus(config-if)#
no auth supplicant-mac 0000.5E00.5343
To reset reauthentication to disabled for the supplicant MAC address
0000.5E00.5343 for port1.0.2, use the commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.2
awplus(config-if)#
no auth supplicant-mac 0000.5E00.5343
reauthentication
supp-timeout
Supplicant response timeout (default 30 seconds).
<
1-65535
>
Seconds for supplicant response timeout.
server-timeout
Authentication server response timeout (default 30
seconds).
<
1-65535
>
Seconds for authentication server response timeout.
reauthentication
Enable reauthentication on a port.
max-reauth-req
No of reauthentication attempts before becoming
unauthorized (default 2).
<
1-10
>
Count of reauthentication attempts.
Parameter
Description
