C613-50163-01 Rev C
Command Reference for GS970M Series
284
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
L
OGGING
C
OMMANDS
LOG
CONSOLE
(
FILTER
)
log console (filter)
Overview
This command creates a filter to select messages to be sent to all consoles when
the
log console
command is given. Selection can be based on the priority/severity
of the message, the program that generated the message, the logging facility
used, a sub-string within the message or a combination of some or all of these.
Syntax
log console [level
<level>
] [program
<program-name>
] [facility
<facility>
] [msgtext
<text-string>
]
no log console [level
<level>
] [program
<program-name>
]
[facility
<facility>
] [msgtext
<text-string>
]
Parameter
Description
level
Filter messages by severity level.
<
level
>
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
System is unusable
1|alerts
Action must be taken immediately
2|critical
Critical conditions
3|errors
Error conditions
4|warnings
Warning conditions
5|notices
Normal, but significant, conditions
6|informational
Informational messages
7|debugging
Debug-level messages
program
Filter messages by program. Include messages from a specified program.
<
program-
name
>
The name of a program to log messages from, either one of the following predefined program
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rsvp
Resource Reservation Protocol (RSVP)
dot1x
IEEE 802.1X Port-Based Access Control
lacp
Link Aggregation Control Protocol (LACP)
stp
Spanning Tree Protocol (STP)
rstp
Rapid Spanning Tree Protocol (RSTP)
mstp
Multiple Spanning Tree Protocol (MSTP)
imi
Integrated Management Interface (IMI)
imish
Integrated Management Interface Shell (IMISH)
epsr
Ethernet Protection Switched Rings (EPSR)
rmon
Remote Monitoring
