ALIBI ALI-NVR5000P Series User Manual Download Page 132

Page: 132 / 191

124

SECTION 8: NETWORK SETTINGS

Enter Server Address for DynDNS (i.e. members.dyndns.org).

ii.

In the NVR Domain Name text field, enter the domain obtained from the DynDNS website.

iii.

Enter the User Name and Password registered in the DynDNS website.

—

NO-IP

: Enter the account information in the corresponding fields. Refer to the DynDNS settings.

Enter Server Address for NO-IP.

ii.

In the NVR Domain Name text field, enter the domain obtained from the NO-IP website (www.no-ip.com).

iii.

Enter the User Name and Password registered in the NO-IP website.

—

SimpleDDNS

: Enter the account information in the corresponding fields. Refer to the SimpleDDNS settings.

Summary of Contents for ALI-NVR5000P Series
































































































































































































Search results

Summary of Contents for ALI-NVR5000P Series

Reviews:

Related manuals for ALI-NVR5000P Series

Brands by name

Popular brands

ALIBI ALI-NVR5000P Series, User Manual

Search results

Summary of Contents for ALI-NVR5000P Series

Reviews:

Related manuals for ALI-NVR5000P Series

Brands by name

Popular brands