ALIBI ALI-NVR5000P Series User Manual Download Page 124

Page: 124 / 191

116

3. Enter the information for new user, including User Name, Password, Level and User’s MAC Address.

—

Set the user

Level

to Operator or Guest. Different

Levels

have different operating permission.

Operator

: The Operator user level has permission of Two-way Audio in Remote Configuration and all operating

permission in Camera Configuration by default.

Guest

: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the local/remote

playback in the Camera Configuration by default.

—

User’s MAC Address

: The MAC address of the remote PC which logs onto the NVR. If this option is configured and

enabled, a remote user with this MAC address only can access the NVR.

4. Click the

to save the settings and go back to the User Management interface. The added new user will be displayed on the

list. See the screen shown below.

5. Select the user from the list and then click the button to enter the Permission settings (

Per

icon) interface. In the example

above, user “

” was selected.

SECTION 7: MANAGING USER ACCOUNTS

Summary of Contents for ALI-NVR5000P Series
































































































































































































Search results

Summary of Contents for ALI-NVR5000P Series

Reviews:

Related manuals for ALI-NVR5000P Series

Brands by name

Popular brands

ALIBI ALI-NVR5000P Series, User Manual

Search results

Summary of Contents for ALI-NVR5000P Series

Reviews:

Related manuals for ALI-NVR5000P Series

Brands by name

Popular brands