7
www.observint.com
© 2018 Observint Technologies. All rights reserved.
Specifications
Camera
Image Sensor:
1/2.5” Progressive Scan CMOS
Signal System:
NTSC
Min. Illumination:
Color: 0.008 Lux @ (F1.2, AGC ON), 0.014 lux @ (F1.6, AGC ON), 0 lux with IR
Shutter time:
1/3 s to 1/100,000 s
Slow shutter:
Support
Lens:
2.8 mm: Horizontal field of view: 109°, Vertical field of view: 60°, Diagonal field of view: 131°
Lens Mount:
M12
Adjustment Range:
Pan: -30° ~ +30°, tilt: 0° ~ 75°, rotate: 0° ~ 360°
Day& Night:
IR Cut Filter
Wide Dynamic Range:
120 dB
Digital noise reduction:
3D DNR
Focus:
Fixed
Compression Standard
Video Compression:
H.265+ / H.265 / H.264+ / H.264 / MJPEG
H.264 code profile:
Main Profile / High Profile
Video bit rate:
32 Kbps ~ 16 Mbps
Audio Compression:
G.711 / G.722.1 / G.726 / MP2L2 / PCM
Audio bit rate:
64 Kbps (G.711) / 16 Kbps (G.722.1) / 16 Kbps (G.726) / 32 ~ 192 Kbps (MP2L2)
Triple Streams:
Yes
Image
Max. Image Resolution:
2688 × 1520
Main Stream:
50 Hz: 25 fps (2688 × 1520, 2304 × 1296, 1920 × 1080)
60 Hz: 30 fps (2688 × 1520, 2304 × 1296, 1920 × 1080)
Sub Stream:
50 Hz: 25 fps (640 × 480, 640 × 360, 320 × 240)
60 Hz: 30 fps (640 × 480, 640 × 360, 320 × 240)
Third Stream:
50 Hz: 25 fps (1280 × 720, 640 × 360, 352 × 288)
60 Hz: 30 fps (1280 × 720, 640 × 360, 352 × 240)
Image Enhancement:
BLC / 3D DNR / BLC
Image Settings:
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or
web browser
ROI:
Support for 1 fixed region for main stream and sub-stream separately
Day / Night Switch:
Day / Night / Auto / Schedule / Triggered by Alarm In
Network
Network Storage:
microSD / SDHC / SDXC card (up to 128G), local storage and NAS (NFS, SMB/CIFS), ANR
Alarm Trigger:
Motion detection, video tampering alarm, network disconnected, IP address conflict,
illegal login, HDD full, HDD error
Protocols:
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP™, SMTP,
SNMP, IGMP, QoS, IPv6
General Function:
One-key reset, Anti-Flicker, heartbeat, mirror, password protection, privacy mask,
Watermark, IP address filtering
System Compatibility:
ONVIF (Profile S, Profile G), ISAPI
User / Host
Up to 32 users
3 levels: Administrator, Operator and User
Client
Alibi Central Management Software (ACMS)
Web Browser
Microsoft® Internet Explorer® version 8 or later
Interface
Audio:
2 Inputs: line in or mic in (built-in microphone), 1 output: line out, mono sound, terminal
block
Communication Interface:
1 RJ45 10M / 100M Ethernet interface
Alarm:
1 Input: Alarm in, 1 Output: Alarm out, terminal block
On-board storage:
Built-in Micro SD / SDHC / SDXC slot, up to 128 GB
Reset Button:
Yes
Audio
Environment Noise Filtering:
Support
Audio Sampling Rate:
8 kHz / 16 kHz / 32 kHz / 44.1 kHz / 48 kHz
Smart Feature Set
Behavior Analysis:
Line crossing detection, Intrusion detection, Unattended baggage detection, Object removal
detection
Line Crossing Detection:
Cross a pre-defined virtual line
Intrusion Detection:
Enter and loiter in a pre-defined virtual region
Exception Detections:
Scene change detection
Recognition:
Face Detection
General
Operating Conditions:
-22 °F ~ 140 °F (-30 °C ~ 60 °C)
Humidity 95% or less (non-condensing)
Power Supply:
12 VDC ± 25%, PoE (802.3af Class3)
Power Consumption:
12 Vdc, 0.7 A, max. 8.5 W, Φ 5.5 mm coaxial plug power
PoE (802.3af, 36 V to 57 V), 0.3 A to 0.1 A, max. 10 W
Impact Protection:
IK08 Protection Level
Weather Proof:
IP66
IR Range:
Up to 30 ft (10 m)
Dimensions:
Φ4.3” × 2.2” (Φ110 mm × 56.4 mm)
Weight:
Camera: Approx. 390 g (0.9 lb.)
Using the Waterproof Ethernet Fitting
Install the
Waterproof Ethernet Fitting
on the Ethernet cable end at the camera when moisture or
contamination exists in the area near the camera. The fitting includes several parts that must be installed in
a specific order. To install the fitting:
1. Place the rubber O-ring over the camera drop cable end cap.
Push the O-ring up to the connector cap.
2. Place the Lock Nut onto the network cable from the router or
switch as shown in the drawing to the right. The inside threads
must be toward the camera end.
3. Place the rubber basket onto the network cable above the lock
nut as shown.
4. Place the end cap onto the network cable above the rubber
gasket as shown. The fingered end must be toward the router
or switch.
5. Install an RJ-45 connector onto the network cable.
6. Plug the RJ-45 connector with the network cable into the
camera network drop cable.
7. Fit the end cap on the network cable onto the camera drop
cable end cap. Rotate the network cable end cap to lock it in
place.
8. Push the rubber gasket fully into the end of the network cable
end cap.
9. Screw the lock nut onto the network cable end cap until it is
fully seated.
Network drop cable
from camera
Network cable from
router or switch
Ethernet Fitting installed
Ethernet Fitting assembled and connected
Drop cable
end cap
Network drop
cable from
camera
Rubber
O-ring
seal
RJ-45
connector
End cap
Rubber
gasket
Network
cable
from
router or
switch
Lock nut
