5
www.observint.com
© 2018 Observint Technologies. All rights reserved.
a. Click on the message to install the plugin.
b. In the message bar at the bottom of the screen, click
Run
. Follow the on-screen instructions to
install
WebComponents
. When the following screen opens, click
Finish
.
The Live View screen with the camera video image should appear.
Capture, Record, Zoom icons
Screen select tabs
Logout button
Live View image
Step 6. Insert microSD card into the camera
A microSD card installed in the provides local storage for video recordings, capture files, and log data. The
camera supports microSD cards with capacities up to 128 GB.
NOTE
: If the camera is not managed by an
NVR or other video management system (VMS), and doesn’t have a microSD card, video recordings, capture
files, and log data are not saved.
1. Remove the outer camera cover. The outer cover unsnaps from the dome cover.
2. Use a #2 Phillips screwdriver to unscrew the four captive screws that secure the dome cover to the
base assembly, and then separate it from the base assembly. At this time, do not remove the plastic
film that protects the clear plastic dome.
Cover (captive)
screw (3)
3. Insert a microSD card into the card slot as shown in the photo below. The label on the card should face
away from the mounting surface.
microSD
card slot
Back of camera base assembly
4. Push the microSD card into the slot as far as possible, and then release it. It should click into place
when fully inserted.
To remove the microSD card, push the card all the way in to release it from the connector, then
withdraw it out of the slot.
Step 7. Adjust camera pan, tilt and rotation
Adjust the camera pan, tilt and rotation to point the camera at your surveillance target. When pointing
the camera, use the
Live View
display on a recorder or remote login. You can also attach the BNC video
