ALGE-Timing Timy3 WP, Manual General

Page: 27 / 40

Manual
Timy3 - General
-27-
9.5.2 RS232
These are settings of the RS232 of the Timy3.
•
<MODE> adjustment for output of net time (calculated run time)
and time of day or only time of day
•
<BAUDRATE> adjustable is 2400, 4800, 9600 or 19200 Baud
•
<SEND MEMORY> sends the memory contents of the Timy3
•
<HANDSHAKE> with or without RTS-CTS handshake adjustment
•
<TRACK-MODE> norm or ident: change output format of TrackTimer
•
<TIMY<->TIMY> communication between two Timy3 (program Stopwatch)
9.5.3 GSM-MODEM
These are settings for a GSM-modem communication. GSM-modems are no longer available!
•
<ENTER NR> enter the number to dial
•
<SEARCH MODEM > search a connected modem
•
<PIN CODE> enter the SIM card pin code
•
<STOP GSM-MODEM> disconnect the connection
•
<MEMORY

SMS send the memory by SMS
9.5.4 GSM-SETTINGS
These are settings for a GSM modem connection. GSM-modems are no longer available!
•
<TEL-NR 1> input of the phone number that it dials
•
<TEL-NR 2> input of the 2nd phone number that it dials
•
<SMS MAX PAK>
•
<CONFIG>
9.6 PRINTER
This menu is for setting the printer parameters.
9.6.1 PRINTER-MODE
•
<PRINTER OFF> printer is switched off
•
<PRINTER ON > printer is switched on (factory setting)
•
<PAUSE> printer stops and times will be saved and printed when
printer is switched on again
9.6.2 PRINT STARTTIME
Adjustment if start time is printed immediately after the start.
•
< PRI START OFF> prints no start time (factory setting)
•
< PRI START ON> prints start time
9.6.3 AUTO LINE FEED
Adjustment of line feeds after printing a data package. It is adjustable between 0 and 9.
•
<0> factory setting is zero
9.6.4 START-LOGO
Adjustment whether the
ALGE-TIMING
logo is printed when switching on the Timy3.
•
<OFF> no logo is printed
•
<ON> logo is printed (factory setting)
9.6.5 PRINT DAYTIME
Adjustment whether the time of day is printed.
•
<OFF> no time of day is printed, only net times (run times)
•
<ON> time of day is printed (factory setting)