ALGE-Timing Timy3 WP, Manual General

Page: 21 / 40

Manual
Timy3 - General
-21-
9.1 CLASSEMENT
The ‘classement’ menu offers different options to print results.
9.1.1 ALL
Prints an overall ranking of different saved times. According to each program the following
options are available:
•
<RUNTIME> ranking sorted according to run time
•
<TOTALTIME> ranking sorted according to total time
•
<PRINT MEMORY> prints the memory of Timy3
•
<MEMORYTIME> prints times of previous heat
•
<PROTOCOL> prints a protocol of all times
9.1.2 CLASS
This prints a ranking list of one class. Subsequently, the bibs belonging to this class have to
be chosen. Only one class can be printed at a time.
9.1.3 START LIST
This function prints the start list of the second heat (only if a heat was finished before).
9.2 GENERAL
In this menu item general settings regarding the timing can be made.
9.2.1 PREC-ROUNDING
Choose precision and mode for calculation of times. The bold printed setting is the factory
setting.
9.2.1.1 PRECISION
This is for setting the calculation precision. Only for net times!
•
<1s> calculated times in seconds
•
<1/10> calculated times in 1/10 seconds
•
<1/100> calculated times in 1/100 seconds
•
<1/1000> calculated times in 1/1 000 seconds
•
<1/10000> calculated times in 1/10 000 seconds
9.2.1.2 ROUNDING
All times are always calculated in day times in 1/10 000 seconds. For conversion to the
runtime at the required precision, one of the following three methods can be chosen:
•
<CUT> cuts off the figures not displayed
•
<UP> rounds up the last displayed figure
•
<ROUND> mathematical rounding of last displayed figure
9.2.2 CHANGE HEAT
Depending on the active program, this item enables moving on to the next heat.
9.2.3 STN-AUTOMATIC
The Timy3 supports different types of automatic start number continuation for the competitors
at start and finish.
9.2.3.1 START
This controls the start number continuation for competitors at the start.
•
<MANUALLY>
•
<UP>
•
<DOWN>