Algam Lighting Vulkan, Manual

Page: 9 / 16

WARNING !
Before use, and before installing this fi xture, read carefully user manual, and follow the safety precautions
listed on this page.
WARNING !
Very high level light output. DO NOT LOOK INTO THE BEAM.
DANGER !
Hazardous voltage, Risk of electric shock!
ALWAYS disconnect the fi xture from power for servicing, for cleaning or installing. Do not connect this unit on
a dimmer power pack.
Protect the unit from rain or moisture.
WARNING !
Burn Hazard. Do not touch. Very hot surface.
The fi xture becomes hot during use and remains hot 10 min after use. Do not touch the unit.
WARNING !
Fire Hazard!
Keep flam mable materials away from the fi xture. Do not operate the fi xture with ambient temperature over
4O°C.
DANGER !
Safety Hazard. Risk of injury.
This unit must be installed by professional people. If suspended, make sure the structure and the hardware
used for this suspension is secured. This Hardware must support at least 10 times the weight of the device
suspended.
Ensure public is not looking at the beam. Do not try to repair the fi xture by yourself. Contact a professional
repair service.
Thank you for choosing one of our Algam Lighting product. Please read this user manual carefully and follow
the instructions to avoid danger or damage to the unit due to mishandling. Keep this user guide for future
reference.
SAFETY INSTRUCTIONS
The symbols shown above are internationally accepted symbols that warn
of potential hazards with electrical products.
if one of those symbols is on your product , please read carrefully the following:
m
0.5
Locate the fixture in a well ventillated spot, away from flammable materials.
The fixture must be fixed at least 50cm from surrouding walls .