Algam Lighting Vulkan, Manual

Page: 11 / 16

INSTALLATION
REMOTE
1- Receiver HF remote connector
2- Wireless DMX built-in receiver
3- Antenna
4- Security hook for safety cable
RECEIVER
WIRELESS DMX
AC POWER IN
T15A - 250V
FUSE
DMX IN DMX OUT
POWER
DMX
WIRELESS
WIRELESS DMX
RECEIVER
DMX OUT DMX IN
MANUAL
CONTROL
0 I
WIRELESS REMOTE
RECEIVER
1
2
3
4
5
6
7
8
5- Mains power supply switch
6- Manual fog spray control
7- Power input & fuse holder
8- DMX IN&OUT connectors
Transmitter
Receiver t
Press A,B,C or D for instant fog spray
Connect the fog machine only in an earthed mains outlet or extension cord.
ATTENTION : the power cord can only be replaced by an original replacement one.
Unplug the mains lead before filling the fluid tank.
How to use
Unpack the fog machine
Do not connect yet the power cable.
Fill the fluid tank .
Connect the unit to mains outlet. Turn ON the mains switch. The heating element is automatically switch ON.
It will take about 4 minutes until the working temperature is reached.
Display will show « warming up».
Once the LCD displays «Ready», you are ready to go.
You can now use the unit in DMX mode, in manual mode, with wireless remote controller or with wireless
DMX signal transmission.
OPERATION INSTRUCTIONS