background image

Please carefully read the instruction, which includes important information about the installation, usage and mainte-

nance, BEFORE operating this device.

The smokemachine must be placed at least 100 cm away from inflammable materials such as curtains, books, 

etc. Make sure that the housing cannot be touched by accident.  

• Never sever or manipulate the power cord or the plug. If a power cord is provided with an earth lead, this is manda-

tory to ensure safe operation! Otherwise a LIFE THREATENING situation exists!

• Unpack and check carefully there is no transportation damage before using the unit. Never put a damaged device 

into operation.

• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit 

as stated in this manual.

• The unit is for indoor use only. Use it only in a dry location. Exposing the device to rain or moisture would cause the 

risk of electrical shock or fire.

• DO NOT let any liquids or objects enter the unit. Should any liquid be spilled on the unit, DISCONNECT the power 

supply to the unit immediately and contact the service company.

• The unit must only be installed in a location with adequate ventilation. Be sure that no ventilation slots are blocked. 

In order to guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the 

unit.

• Disconnect the device from the mains power before any servicing or maintenance.

Notice regarding power disconnection: To disconnect the device from the power source the power plug must be 

removed from the power socket. For this reason the device must be placed in a position where a constant unobstruc-

ted access to the power socket is assured, thus in an emergency situation you are able to immediately pull out the 

power plug. To eliminate the risk of fire you must completely disconnect the power plug from the power socket after 

the device has been used.

• Always grasp the power cord by the plug. Do not pull on the cord itself and never touch the power cord with wet 

hands as this could result in a short circuit or an electrical shock. Do not place the device, speaker cabinets or 

anything else on the power cord and make sure that it does not become clamped.

• Before a storm and/or a thunderstorm with a risk of lightning, disconnect the device from the mains power supply.

• Under no circumstances may you open the device housing. Should you do so your safety would not be assured. 

There are no operational components whatsoever inside, only dangerous voltages that can give you a deadly shock!

• NEVER use the unit under the following conditions :> In places subject to vibrations or bumps.> In places with a 

temperature of over 45 °C or less than 2 °C.> In places subject to excessive dryness or humidity (ideal conditions are 

between 35% and 80%).

• Never submerse the device in water or any other liquid. Only wipe it with a slightly damp cloth.

• Never operate the device near flames, flammable, explosive materials, or hot surfaces. Otherwise you run the risk 

of causing a fire.

• Never leave this device running unattended.

• This appliance must not be used by individuals (including children) with restricted physical, physiological or intellec-

tual abilities or deficiencies in experience and/or knowledge unless they are supervised by a person responsible for 

their safety or receive from this person instruction in how the appliance is to be used.

• Keep children away from the device and power cord! Children frequently underestimate the dangers of electrical 

devices. Also keep the plastic packaging well away from small children. There is a risk of suffocation!

• In the event of serious operating problems, stop using the unit immediately. Never try to dismantle, repair or modify 

the unit by yourself. Otherwise warranty becomes void. Repairs carried out by unskilled people can lead to damage 

or malfunction. Please contact the nearest authorized technical assistance centre.

Summary of Contents for Vulkan

















Reviews: