AlfrescoPlus BBQ MODULE Assembly Instructions Manual Download Page 14

Page: 14 / 24

ALFRESCOPLUS™

ASSEMBLING THE AIRFRAME HEAT-SHIELD

Insert the pre-assembled vertical side shields onto the horizontal bottom heat shields by pressing
firmly into pre inserted prongs. The infill panel should still remain loose at this point.

Insert the pre-assembled vertical side shields onto the horizontal bottom heat shields by pressing firmly into pre inserted

prongs. The infill panel should still remain loose at this point.

After the heat shield left and right hand side have been assembled your airframe should resemble the diagram below.

Assembling the Airframe Heat-shield

The Prong in the horizontal heat

shield will fit into the frame firmly,

however can be removed again.

FIG 28

FIG 29

After the heat shield left and right hand side have been assembled your airframe should
resemble the diagram below.

FIG. 29

Insert the pre-assembled vertical side shields onto the horizontal bottom heat shields by pressing firmly into pre inserted

prongs. The infill panel should still remain loose at this point.

After the heat shield left and right hand side have been assembled your airframe should resemble the diagram below.

Assembling the Airframe Heat-shield

The Prong in the horizontal heat

shield will fit into the frame firmly,

however can be removed again.

FIG 28

FIG 29

Note: The Prong in the horizontal heat shield will fit
into the frame firmly, however can be removed again.

FIG. 28

Summary of Contents for BBQ MODULE

























Search results

Summary of Contents for BBQ MODULE

Reviews:

Related manuals for BBQ MODULE

Brands by name

Popular brands

AlfrescoPlus BBQ MODULE, Assembly Instructions Manual

Search results

Summary of Contents for BBQ MODULE

Reviews:

Related manuals for BBQ MODULE

Brands by name

Popular brands