AlfrescoPlus BBQ MODULE Assembly Instructions Manual Download Page 11 | Manualshive

Page: 11 / 24

background image

BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS

|

11

Position modules in the desired configurations. Level each module and ensure the heights are correct so that joining holes

line up. Now join the two modules with the barrel bolts supplied. Do Not over tighten barrel bolts. Position and Level the

whole assembly in final position. (View Image 33,34,35,36,37,38,39 and 40)

FIG 20

FIG 21

FIG 22

Attaching and Leveling the MODULES

Make sure the cabinets are leveled and aligned, ready to be connected by barrel bolts. Please note the biscuit

inserted into the kick plate provided, ensure the kick plate is aligned ready to be connected.

ATTACHING & LEVELING THE MODULES

Position modules in the desired configurations. Level each module and ensure the heights are
correct so that joining holes line up. Now join the two modules with the barrel bolts supplied.
Do Not over tighten barrel bolts. Position and Level the whole assembly in final position (View
FIG. 20,21,22,23,24,25,26 and 27).

FIG. 20

FIG. 21

Make sure the cabinets are leveled and aligned, ready to be
connected by barrel bolts. Please note the biscuit inserted
into the kick plate provided, ensure the kick plate is aligned
ready to be connected.

FIG. 22

Position modules in the desired configurations. Level each module and ensure the heights are correct so that joining holes

line up. Now join the two modules with the barrel bolts supplied. Do Not over tighten barrel bolts. Position and Level the

whole assembly in final position. (View Image 33,34,35,36,37,38,39 and 40)

FIG 20

FIG 21

FIG 22

Attaching and Leveling the MODULES

Make sure the cabinets are leveled and aligned, ready to be connected by barrel bolts. Please note the biscuit

inserted into the kick plate provided, ensure the kick plate is aligned ready to be connected.

Position modules in the desired configurations. Level each module and ensure the heights are correct so that joining holes

line up. Now join the two modules with the barrel bolts supplied. Do Not over tighten barrel bolts. Position and Level the

whole assembly in final position. (View Image 33,34,35,36,37,38,39 and 40)

FIG 20

FIG 21

FIG 22

Attaching and Leveling the MODULES

Make sure the cabinets are leveled and aligned, ready to be connected by barrel bolts. Please note the biscuit

inserted into the kick plate provided, ensure the kick plate is aligned ready to be connected.

«
...
9
10
11
12
13
...
»

Summary of Contents for BBQ MODULE

























Reviews:

No comments

Related manuals for BBQ MODULE

Brand: Yardistry Pages: 40

Brand: NATHAN JAMES Pages: 26

Klearside Impulse Series

Brand: Bakare Pages: 8

Brand: HOMCOM Pages: 4

OSBOURNE 383598

Brand: Next Pages: 9

Brand: Forte Pages: 20

ARC COFFEE TABLE

Brand: Sage Living Home & Decor Pages: 2

Brand: Hanover Pages: 9

Brand: HAMPTON BAY Pages: 12

Brand: Safavieh Pages: 4

Brand: Coaster Pages: 4

Brand: Garden Treasures Pages: 18

New Space Series

Brand: Nameek's Pages: 5

Brand: HENN Pages: 16

Brand: Costway Pages: 6

SILKEBORG SI-41

Brand: Woltra Pages: 13

Brand: Blue Wave Pages: 7

Brand: Safavieh Furniture Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands