AlfrescoPlus BBQ MODULE Assembly Instructions Manual Download Page 12 | Manualshive

Page: 12 / 24

background image

12

|

ALFRESCOPLUS™

FIG 23

FIG 24

Diagram using the Allen key provided to fasten cabinets using the barrel bolts.

Insert the “biscuit” connection

part into the slot that is pre cut. If

required, gently tap into place

with soft sided hammer.

Joining the Cabinet with Barrel Bolts

Cabinet Joined with Barrel Bolts

FIG 23

FIG 24

Diagram using the Allen key provided to fasten cabinets using the barrel bolts.

Insert the “biscuit” connection

part into the slot that is pre cut. If

required, gently tap into place

with soft sided hammer.

Joining the Cabinet with Barrel Bolts

Cabinet Joined with Barrel Bolts

Insert the “biscuit” connection
part into the slot that is pre
cut. If required, gently tap into
place with soft sided hammer.

FIG. 23

Joining the Cabinet with Barrel Bolts

Cabinet Joined with Barrel Bolts

FIG. 24

Diagram using the Allen key provided to fasten cabinets using the barrel bolts.

«
...
10
11
12
13
14
...
»

Summary of Contents for BBQ MODULE

























Reviews:

No comments

Related manuals for BBQ MODULE

Brand: East West Furniture Pages: 5

Brand: Hanover Pages: 4

Brand: OLG Pages: 6

Brand: Enwork Pages: 14

Brand: OS Pages: 21

Brand: Courtyard Creations Pages: 6

Brand: IKEA Pages: 12

Brand: Symphony Pages: 12

Brand: Signature Hardware Pages: 6

Cuba Walnut Robe

Brand: Next Pages: 18

Brand: Unfinished Furniture of Wilmington Pages: 4

Lisbon LISBON7PC-TAN

Brand: Hanover Pages: 9

Brand: Officeworks Pages: 12

Brand: Arbor Technology Pages: 9

Brand: Member's Mark Pages: 10

Brand: calligaris Pages: 2

Brand: Costway Pages: 8

brooklyn+max WyndenHall AXCHRP-08-WH

Brand: SIMPLIHOME Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands