Alfresco ALF-PZA, Use & Care Manual

Page: 27 / 32

27
REMOVE THE LIGHT BULB
Reach inside the light fixture and remove the light bulb by pulling it straight up and out of the socket.
(See Figure # 17 on page 26)
INSTALLING A NEW LIGHT BULB:
NOTE: When replacing light bulbs, use a soft clean cloth (cotton or paper towels) when handling lights.
Always keep halogen lights free of fingerprints and grease when replacing. Because of the light bulb’s
very high operating temperature, grease or fingerprints left on the light bulb might reduce the bulb’s life.
Insert a new light bulb using a clean cloth and do not force the light bulb in the socket. Very little effort
is required for the bulb to “SNAP” and lock into place.
Look at the bulb and verify that no fingerprints are left on it. Wipe off any fingerprints and or grease that
might have accidentally come in contact with the glass of the light bulb.
Replace the light cover by inserting it into the light fixture at a slight angle until it “SNAPS” into place.
Power up your
Alfresco
™ Pizza Oven and verify the light bulb operation by turning on the light
switch.
ADDITIONAL IMPORTANT CLEANING AND STORAGE CONSIDERATIONS:
In order to maintain your
Alfresco
™ Pizza Oven
in clean working order, it will be necessary, un-
der certain conditions, to take additional precautions. If your oven is located in a coastal area, it
will be exposed to salty air which is corrosive. If it is located close to a swimming pool or Jacuzzi
with chlorinated water, then it will be exposed to dilute hydrochloric acid which can be formed as
a result of chlorine compounds used in the pool causing chlorine to be combined with hydrogen
and water in the atmosphere.
Also, muriatic acid (another name for hydrochloric acid) is used to maintain the correct ph bal-
ance in the pool water. Chlorine is an oxidizing agent, and as such can promote rapid corrosion
or other oxidizing processes which can damage various materials.
Type 304 stainless steel is highly resistant to corrosion but given enough exposure to such cor-
rosive conditions might succumb to some degree, such that pitting or rusting may occur. Our
Pizza Oven materials have been tested in saline solutions with higher salinity than sea water,
and they have been tested in highly chlorinated solutions.
They have also been tested by exposure to highly acidic foods. During and after these tests, we
found these materials were able to withstand exposure over prolonged periods of time. Howev-
er, the above mentioned corrosive substances, along with neglect, can lead to a situation where-
by conditions might combine to cause some damage to occur.
Therefore, we suggest that you always keep your
Alfresco
™ Pizza Oven
clean, dry and cov-
ered when not in use.
This is even more important when long term storage is intended; always store the oven clean,
dry and covered with your
Alfresco
™ Pizza Oven
cover.