Alfresco ALF-PZA, Use & Care Manual

Page: 14 / 32

14
When installing the
Alfresco
™ Pizza Oven as a built-in unit, careful
consideration to the materials used must be made. As a general rule,
the materials and construction methods should be the same as the
requirements for an outdoor fireplace while maintaining all local build-
ing codes.
The image on the right, Figure # 8, shows how the
Alfresco
™
Pizza Oven might look like in a built-in configuration.
When building the pizza oven into a non-combustible structure, it is
critical to have access to the bottom of the unit. This will be the only
means of service and maintenance as the oven will no longer be re-
movable.
Alfresco
™ recommends installing an AB-30 double sided door for
service, storage, gas supply and electrical power access.
The Pizza Oven must rest on two 2” ledges to give it proper support
and must have free air intake from the bottom of the oven. The built-
in construction should have ample ventilation under the oven in order
to have the proper combustion.
Dimensions shown on Figure # 9 below are shown as reference to aid in the design and planning only.
Figure # 9
Figure # 8
ALF-PZA-BIA Kit