ALFAtron MUH88E, User Manual

Page: 6 / 45

MUH88E Kit 4K Home Distribution Hub
Alfatron.co.za
1. Introduction
1.1
Introduction to the MUH88E Kit
MUH88E Kit is a professional 4K HDBaseT Home Distribution Hub Kit, which consists
of a 4K HDBaseT Matrix Switcher, 7 HDBaseT Receivers and accessories.
MUH88E is a professional 8x8 HDBaseT Matrix Switcher that consist of the following
inputs and outputs, 8 HDMI IN (4kx2K@60Hz signal at max), 7 IR IN, 1 IR EYE, 8 IR
OUT, 1 IR OUT ALL, 7 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1 L&R RCA OUT,
and TCP/IP, RS232 control port via phoenix connector.
The TPHD-BYE-R is an HDBaseT Receiver that consists of the following inputs and
outputs, 1 HDBaseT IN, 1 IR IN, 1 IR OUT and HDMI OUT. The receiver is powered
directly by the Matrix Switcher.
All HDMI inputs can be selected by either the front panel buttons, IR, RS232 or GUI.
The selected source is delivered to HDBaseT zoned outputs 1~7 & HDMI Output.
The Matrix Switcher is capable of delivering 4K signals up to 40m, 1080p up to 70m
and powering the receivers via a single CAT5e cable. It is however recommended to
use good quality CAT6 cable.
The Matrix Switcher supports EDID management and is HDCP 2.2, 1.4 compliant.
Audio sources can be selected via RS232 commands and TCP/IP at the Matrix
Switcher or by 3rd Party control.
1.2
Features
 HDBaseT Matrix Switcher that features 7 HDBaseT outputs and 1 HDMI output

Supports HDCP 2.2, and is backwards compatible with previous version of HDCP
and HDMI
 Transmits 4Kx2K @ 60Hz 4:2:0 up to 26 ft. (8m) via HDMI port and 131 ft. (40m)
via HDBaseT port
 7 HDBaseT outputs with distances up to 230 ft. (70m) at 1080p and 131 ft. (40m)
at 4Kx2K on a single Cat5e/6 cable
 HDBaseT Receivers are powered by the matrix using PoC technology
 LED indicators show real-time switching status
 Controllable via front panel, RS232, IR and TCP/IP
 Built-in GUI for TCP/IP control and setup
 Powerful EDID management
 Support CEC to control far-end display devices via RS232 commands
 Features Micro USB port for firmware upgrades