ALFAtron MUH88E, User Manual

Page: 22 / 45

MUH88E Kit 4K Home Distribution Hub
Alfatron.co.za
Command Function Feedback Example

X=9, disable HDMI audio output
for all ports.
/+[Y]/[X]:******.
Set communication between PC and
HDBaseT receiver.
①
Y is for RS232 port (connect
with RS232 port of HDBaseT
receiver)
The value of Y is defined into
the following meanings (in a
given baud rate depended by
the value of X):
a. Y = 1~8, send this command to
the corresponding HDBaseT
receiver to control far-end
device.
b. Y = 9, send this command to all
HDBaseT receivers to control all
far-end devices.
c. Y = A~H, under PWON mode,
send this command to the
corresponding HDBaseT
receiver to control far-end
device.
d. Y = a~h, under PWOFF mode,
send this command to the
corresponding HDBaseT
receiver to control far-end
device.
②
X is for baud rate, its value
ranges from 1 to 7 (1--2400, 2--
4800, 3--9600, 4--19200, 5--
38400, 6
—57600, 7--115200)
③
***** is for data (max 48 Byte)
/+[Y]/[X]:******
EDIDH[x]B[y].
Input port [y] learns the EDID from
output port [x].
If the EDID data is available and the
audio part supports not only PCM
mode, then force-set it to support
PCM mode only. If the EDID data is
not available, then set it as initialized
EDID data.
EDIDH4B3