Alfatron ALF-12X-SDIC, ALF-20X-SDIC and ALF-30X-SDIC
3
1.2 General Operation at Boot up
1) After powering on and self-checking, the camera will automatically return to the preset 0 position if it’s pre-set.
2) The default address for the IR remote control is 1#.
If the unit is restored to factory defaults, the remote control default address will restore to 1#.
1.3 Mounting Brackets
Notes:
Ceiling or wall mounting brackets can only be mounted on template and concrete wall.
For safety reasons, plasterboard is not recommended.
1)
Wall Mounting:
