Alfatron ALF-12X-SDIC, ALF-20X-SDIC and ALF-30X-SDIC
11
Storage Humidity
20%~95%
Working Temperature
-10
℃
~+50
℃
Working Humidity
20%~80%
Dimension
181mmX115mmX149mm
Weight
1.15KG
Accessory
Package
Power Supply, RS232 Control Cable, USB3.0 cable(U3 model), IR Remote Control, User
Manual
Optional Accessories
Ceiling / Wall Mount (Extra Cost)
3. Remote Control
3.1 Match Code for Wireless Remote Control
One to One Code Matching:
Press the "set" and "*" keys together for 3 seconds then the LED indicator will start flashing. The camera
receives the signal and powers on, LED indicator will go off if code matching is successfull. The camera
can be controlled by this wireless remote control only after one to one code pairing. Otherwise, please
clear the code matching of this remote control, or use other remote control to pair with the camera again.
If one to one code matching fails, the red LED light will flash for 20 seconds and then switch off, camera
will stop code matching and go into sleep mode; Press any key to wake up the camera and re-match the
code.
Note: After code matching successfully, please select the camera address to control it.
Clear Code:
Press the "set" and "#" keys together for 3 seconds then the LED indicator will start flashing. Camera will
power off and on, the LED indicator will go off if clearing the code was successful.
Sleep Mode and Wake Up:
Press any key to wake up the camera from sleep mode.
3.2 Keys Introduction for IR Remote Control
1). In this manual, “press the key” means a click rather than a long-press, and a special note will be given if a long-press for
more than one second is required.
2). When a key-combination is required, do it in sequence. For example,“
【
*
】
+
【
#
】
+
【
F1
】
”means press“
【
*
】
”first and then
press“
【
#
】
” and lastly press“
【
F1
】
”.
1. Standby Key
The camera enters standby mode if long press for 3 seconds on standby key;
Long press for 3 seconds again on the standby key, the camera will self-check again and return to HOME position (If preset 0
