Energy 18 – User Guide
8.1.1 Lifting the vessel
Lowering the vessel into the water with a lift requires caution. It is very important to
attach the lifting strap to the right spot. An incorrect attachment of the lifting straps could
lead to the slipping of the vessel to the ground and its ruining. The straps must not be
attached to the cleats. Their sole purpose is to tie the vessel to the pier and the
positioning of the fenders. The spots where the lifting straps can be attached are indicated
with a warning sticker. The lifting straps should be positioned as in the picture below.
8.1.2 Towing the vessel
If the vessel must be towed by another vessel due to a breakdown or if you run out of
petrol, empty the batteries or for any other reason, carefully choose where to attach the
vessel. Attaching it to the cleats is forbidden! The towing rope can be tied through the
opening on the prow.
8.2 Lifting and lowering the roof
If your vessel features a sliding roof, its movement is enabled by the hydraulic mechanism.
The movement of the roof can be switched on by pressing the button on the remote
control or by pressing the button on the control console. When the roof is in its top
position, the passengers can embark the boat more easily by additionally opening a part of
the roof.
v1.0
www.alfastreet-marine.si
48
Picture 25: Lifting the vessel
