Energy 18 – User Guide
does need to be changed, it is necessary to take into account its value and substitute it
with a fuse of the same value.
5.6.1 Fuse for moving the roof
The fuse is located under the seat in the vessel’s prow (as indicated in the picture below).
You can reach it by removing the seat’s pillow in the prow and the drawer under the
pillow. The fuse is on the right and is automatic, which means that when it disconnects,
there is no need to replace it, just put it back into its working position. Before doing this,
you must find out the reason for the overload and the disconnection. Only then the fuse
can be put into the working position (as shown in the picture – position „ON“).
5.6.2 Fuses of other current-using components
The fuses of other current-using equipment are located on the control panel of the control
console under the steering wheel. They are reachable by opening the cover. These fuses
are also automatic, therefore they do not need to be replaced when disconnected, it is
enough to put them back into the working position. Before doing this, it is necessary to
find out the reason for the overload and the disconnection of the fuse. Only then the fuse
can be placed back into the working position.
v1.0
www.alfastreet-marine.si
34
Picture 16: Fuses location
Picture 14: Location of the fuse for moving
the roof
