DRIVER A
SSISTANCE
86
“RACE” Driving Mode
The following active driver assistance safety
systems will not be available in the RACE driving
mode (Quadrifoglio versions only). If any of these
systems are selected, a dedicated message will
appear on the display:
Blind Spot Monitoring
Active Blind Spot Alert
Lane Departure Warning
Lane Keeping Assist
Forward Collision Warning
Driver Attention Assist
Intelligent Speed Control
Traffic Sign Recognition
SYSTEM ACTIVATION/
DEACTIVATION
Using the touchscreen function to proceed as
follows:
Press the display to select the desired item
Move the graphic button to the right: the
display will show the message “ON”
(to deactivate, move the graphic button to the
left - message “Off”) and activate the system.
Using the controls located on the center stack to
proceed as follows:
Turn the Rotary Pad and select the desired
item
Push on Rotary Pad to confirm the choice and
activate the system. The selected item will be
activated automatically. When the system is
activated, push the Rotary Pad to deactivate it.
A
CTIVE
B
LIND
S
POT
A
SSIST
This function can be used to select the
“readiness” of the Active Blind Spot Assist
system, which can actively intervene on the
steering wheel if other objects are detected in the
blind spot of the exterior mirrors.
The options available are:
“Mode”: Used to set the following operating
modes: “Warning and Brake”, “Only Warning”,
and “Off” (where provided).
“Warning Type”: Can be used to set the
following operating modes: “Visual and
acoustic signal”, “Visual and vibration”, and
“Acoustic and vibration”.
“Sensitivity”: This can be used set the
“readiness” of the system to intervene, based
on the distance from the obstacle (the
possible options are “High” and “Low”).
“Strength”: This can be used to set the “force”
that the system must apply to the steering
wheel to warn the driver of the need to keep
the car in the lane (the possible options are
“High” and “Low”).
B
LIND
S
POT
M
ONITORING
This function can be used to set the warning
linked to the presence of objects in the door
mirror blind spot.
The options available are:
“Visual and Acoustic”: The system warns the
driver that an obstacle is present through
acoustic (via the speakers in the car) and
visual indications using warning lights on the
door mirrors.
“Visual”: The system warns the driver that an
obstacle is present through warning lights on
the doors.
“Off”: System disengaged.
L
ANE
D
EPARTURE
W
ARNING
This function can be used to select the
“readiness” of the Lane Departure Warning
system to intervene.
To make this adjustment, select the “Sensitivity”
option: the options are “High” and “Low”.
22_AF_IES_EN_USC_t.book Page 86
