W
IDGET
16
Using The Commands Located On The Rotary Pad
1. Press the Settings button on the
center stack.
2. Turn the Rotary pad to select the setting.
3. Push the Rotary Pad to confirm the selection
and then select one of the following items:
•
Widget Reorder: Move the desired widget
to the right or left of the display.
•
Widget Resize: Change the size of the
widget display to “1/3 view” or “2/3 view”
of the display area.
•
Widget Content: View the content of the
desired widget.
RESIZING WIDGETS
The widgets can occupy 1/3 or 2/3 of the
display area.
NOTE:
Not all widgets have an Enlarge Graphic button.
If the button is not present, it will not be
possible to activate “2/3 view” of the widget.
Using The Touchscreen
1/3 View: Icons, menu name, main
information, and graphic buttons (up to 3)
appear on the display.
2/3 View: To enlarge the widget, press the
Enlarge button located on the top of the
widget. When this type of touchscreen is
active, additional information is shown on the
touchscreen with respect to the “1/3 view”
(e.g. the Navigation mode widget will display
the enlarged navigation map while the Radio
mode widget will display the Source graphic
button). To return from the “1/3 view”, press
the button. Up to four graphic buttons will
also be displayed.
Using The Commands Located On The Rotary Pad
Activate the Settings menu and then select the
item “Widget Resize”.
Only resizable widgets will be activated (these will
appear on the display with a different color from
those that cannot be resized and therefore
cannot be selected).
Push the Rotary Pad to resize the widget and
switch to “2/3 view”. All the widgets will be
enlarged towards the right side of the
touchscreen. Press the button on the display
to return to the normal view.
22_AF_IES_EN_USC_t.book Page 16
