Dna
By selecting the dna item from the main menu it is possible to access the mode screen that highlights (possibility of selection) the item corresponding
to the actual position of the switch.
Selecting the item relating to the dna mode makes it possible to access the information screen that shows the vehicle setting divided between Handling
and Engine areas in relation to the selection mode.
The pop-up information containing the vehicle settings is shown automatically by the system when a change in the switch status takes place.
My car set up function
The system allows the radio navigator and vehicle set up to be operated.
The changes selected by the user are "proposed" to the panel.
The menu makes six main groups of functions available.
The display configuration makes it possible to:
- select the display lighting mode;
- set the display brightness;
- select the units of measurement.
The volumes of the following can be set:
- Voice commands;
- Panel buzzer;
- Panel buttons.
Vehicle parameters configuration: makes it possible to configure the behaviour of some vehicle devices (if the vehicle is not fitted with the special
equipment, the corresponding item cannot be selected):
- Service due;
- Speed limit;
- Door locking when moving;
- Information repetition to panel;
- DRL activation;
- Courtesy lights activation;
- Dusk sensor sensitivity.
- Time&Date: date and time can be set.
- Language: the language for the device can be changed.
