Alfa Romeo 8C Spider, Owner'S Manual

Page: 141 / 235

139
5
A B
C
USING THE VEHICLE
CAUTION
Cruise Control must only
be activated when traffic and the
route permit a constant speed to be
maintained safely, for a sufficiently
long distance.
CONTROLS
The Cruise Control function is controlled by
means of the switch
A , the dial B and the button
C (RCL).
Switch A can be set to two positions:
- OFF the device is deactivated;
- ON the device is active. When the device
is activated, the symbol illuminates on
the instrument panel display.
The dial B is used to store and maintain the
vehicle speed, or to increase or decrease the
speed stored.
Rotate the dial
B
to position (+) to save the
speed reached or to increase the speed stored.
Rotate the dial
B
to position (–) to decrease the
stored speed.
Each turn of the dial
B increases or decreases the
speed by about 1 km/h. Rotate and hold the
dial to vary the speed continuously. When a new
speed is reached, it will automatically remain
constant.
Button
C (RCL) allows you to reset the stored
speed.
WARNING: When the ignition key is turned to
position STOP or the switch A to position OFF ,
the stored speed is deleted and the system
deactivated.
STORING A SPEED
Set the switch
A
to ON and bring the vehicle up
to the desired speed. Rotate the dial
B
to (+)
for at least three seconds, then release it. The
vehicle speed is saved and the accelerator pedal
can then be released.
The vehicle will proceed at the constant speed
stored in the memory until the brake pedal is
pressed.
If necessary, (for example, to pass another
vehicle), you can accelerate by simply pressing
the accelerator pedal. Afterwards, when you
release the accelerator pedal, the vehicle will
return to the speed saved previously.
Alfawiki.nl